3535 High Brightness 60 ° Series 365 -420 nm UV Light Emitting
Diode For Special Lighting
Feature :
1.Dimension(length*width*height: mm): 3.45* 3.45* 2.95 mm
2.High Reliability ,longer life time .
3. Low forward voltage .
4.Wavelenth : 365-370nm , 380-390nm ,390-400nm ,400-410nm,
410-420nm
5.Moisture sensitivity level : 5a
6.Pb - free reflow soldering application
7. Rohs compliant
8. 3000pcs per reel
9. High purity aluminum nitride stent, low thermal resistance, good
heat dissipation
10. Automated packaging, Molding process, product consistency is
good
11. Low spectral range, high light uniformity
12. The package set tube, ESD protection capability
13. Strict reliability test, high reliability
Application :
Light curing, fluorescence detection, coin check pseudo,
non-destructive testing, special lighting, dental curing,
sterilization, UV exposure .
Parameter :
| Part No. | Watt | WD(nm) | VF(V) | IF(mA) | Φe(mW) |
| RC35E6-UBE-AR | 2-3W | 365-370 | 3.2-4.0 | 700 | 800-1000 |
| RC35E6-UEE-AR | 2-3W | 380-390 | 3.2-4.0 | 700 | 1000-1400 |
| RC35E6-UHE-AR | 2-3W | 390-400 | 3.2-4.0 | 700 | 1000-1400 |
| RC35E6-UIE-AR | 2-3W | 400-410 | 3.2-4.0 | 700 | 1000-1400 |
| RC35E6-UKE-AR | 2-3W | 410-420 | 3.2-4.0 | 700 | 1000-1400 |
Note:
1. 1/10 Duty cycle, 0.1ms pulse width.
2. The above forward voltage measurement allowance tolerance is
0.1V.
3. The below color coordinates measurement allowance tolerance is
0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the
absolute maximum rating of the product.
6. All measurements were made under the standardized environment of
Refond.
7.When the LEDs are in operation the maximum current should be
decided after measuring the package temperature,junction
temperature should not exceed the maximum rate.LED
Technical Support
Pass the international benchmarking enterprises and third-party SGS
social responsibility audit, in line with EICC electronics industry
code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other
international standards in Third party testing result.
TS16949
ISO9001
QC 080000
ISO14001
OHSAS18001
ISO17025
We use scientific research and innovation as a driving force for
development, build the core competitiveness of enterprises, is
committed to every customer can get more secure, more
environmentally friendly products.
Laboratory
Experimental Center was established in 2013, covers an area of over
600 square meters
CNAS Certification
December 2015 CNAS certification, included in the national
laboratory directory. For the company's technological innovation
and product development to provide a complete means of testing,
product quality management to provide a wealth of reliable test
data.
