RE35 60° Series 850nm IR Light Emitting Diode Using For Security
Equipment
Feature :
1. Dimension(length*width*height: mm): 3.0* 3.0* 2.53 mm
2. High Reliability
3. Low forward voltage .
4. Peak wavelenth : 850 nm
5. Moisture sensitivity level : 5a
6. Pb - free reflow soldering application
7. Rohs compliant
8. 3000pcs per reel
9. Low thermal resistance, minimum 6 ℃ / W @ 1A, high reliability
10. Low voltage, high brightness, excellent antistatic performance
11. Good air tightness, moisture level - LEVEL 1
12. The product is RoHS compliant; Passed the Halt test
13. Product specifications complete
Package Dimmension :
Application :
Widely used in security monitoring, intelligent home, virtual
reality, infrared projectors, car sensing, iris recognition,
gesture recognition, equipment safety systems, medical equipment
and so on .
Description :
This product uses the EMC Molding package ,it has a high
reliability ,it also be widely used for security monitoring and
sensor ,such as surveillance systems ,infrared illumination for
cameras and machine vision systems.
Parameter :
| Part No. | IF(mA) | VF(V) | Po(mW) | WD(nm) | View Angle |
| RE30A6-IRT-FS | 400 | 1.4-2.0 | 280-450 | 840-870 | 60 |
| RE30A6-IRX-FS | 500 | 1.4-2.0 | 280-450 | 840-870 | 60 |
| RE30A6-IQX-FS | 500 | 1.4-2.0 | 280-450 | 930-960 | 60 |
| RE30A6-IRA-FS | 700 | 1.4-2.0 | 450-710 | 840-870 | 60 |
Note:
1. 1/10 Duty cycle, 0.1ms pulse width.
2. The above forward voltage measurement allowance tolerance is
0.1V.
3. The below color coordinates measurement allowance tolerance is
0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the
absolute maximum rating of the product.
6. All measurements were made under the standardized environment of
Refond.
7.When the LEDs are in operation the maximum current should be
decided after measuring the package temperature,junction
temperature should not exceed the maximum rate.LED
Technical Support
Pass the international benchmarking enterprises and third-party SGS
social responsibility audit, in line with EICC electronics industry
code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other
international standards in Third party testing result.
TS16949
ISO9001
QC 080000
ISO14001
OHSAS18001
ISO17025
We use scientific research and innovation as a driving force for
development, build the core competitiveness of enterprises, is
committed to every customer can get more secure, more
environmentally friendly products.
Laboratory
Experimental Center was established in 2013, covers an area of over
600 square meters
CNAS Certification
December 2015 CNAS certification, included in the national
laboratory directory. For the company's technological innovation
and product development to provide a complete means of testing,
product quality management to provide a wealth of reliable test
data.
